SUUNTO X6HR - Manual (Page 60)

58
Analyzing Data
You can analyze the data in the logs according to your activities and different time
periods. Select the files you want to analyze from the folder and click on “open logs”.
then press “analyze”. the analysis displays information on altitude zones, duration
and heart rate zones. the analysis results are displayed as 3-D bar diagrams that you
can rotate on the screen.
Changing Suunto X6
hr
Settings
You can change some Suunto X6
hr
settings with the Wristop Computer section of
Suunto activity manager. You can change the following settings:
• asc/Dsc—select the used ascent/descent unit (m/s, m/min, m/h, ft/s, ft/min, ft/h).
• altitude—change the used altitude unit (m or ft).
• Pressure—select the used pressure unit (hPa or inHg).
• temperature—select the used temperature unit (°f or °C).
• time—select between - or 4-hour display.
• Date—select the date format (day/month, month/day, day).
• light—select the light setting (normal, nightUse, off).
• tones—set the buttons on or off.
• Icons—set the mode icons on or off.
the current settings are shown in yellow. to change them, click the desired settings
with your mouse and then click “Update settings” in the lower right corner of Sam when
your Suunto X6
hr
is connected to PC.