Unable to configure device, Hp jetadmin or hp web jetadmin – Zebra Technologies PrintServer User Manual
Page 145
Advertising
134
PrintServer II User and Reference Guide
Hardware Troubleshooting
Troubleshooting the PSII
Unable to Configure Device
To assign an IP address to a ZebraNet
PSII
using ZebraNet View, you must be on the
same subnet. If ZebraNet View has Multicast enabled, you might be able to view the
ZebraNet
PSII
on another subnet, but you will not be able to configure the device.
HP JetAdmin or HP Web JetAdmin
The ZebraNet
PSII
might be setup and managed using HP JetAdmin or HP Web
JetAdmin products.
Advertising