Zebra Technologies PrintServer - Manual (Page 149)

138 PrintServer II User and Reference Guide
Frequently Asked Questions
FAQs
What are the minimum
requirements to network a
printer?
• Cat-5 network cable with 10 base-T con-
nectors
•
PSII
• Hub or Switch
• If a hub or switch is NOT used, you need a
cross-over cable.
• Workstation running a TCP stack with print
services installed
What do the activity lights on the
PSII mean?
• Fast blinking (9 times/second) - no link
status
• Slow blinking (1 time/second) - no IP
address, or the unit is sending data to the par-
allel port
• Blinking
red - unit is still in POST
•
red - green - red - green - unit is in Netware
firmware update mode
•
red - red - green - green - unit is in IP firm-
ware update mode
• Solid
red - unit has failed POST. Remove
network cable and restart printer
What is the default User ID and
password for the print server
• The User ID is admin and the password is
1234.
Question Answer