Zebra Technologies PrintServer - Manual (Page 89)

78 PrintServer II User and Reference Guide
Using Printing Protocols
Internet Printing Protocol (IPP)
Internet Printing Protocol (IPP)
IPP is an application-level protocol that is used for distributed printing over the
Internet. Using IPP from any standard IPP client, you can transfer jobs to a printer that
is connected to your ZebraNet
PSII device and the Internet.
To setup your PSII to support IPP, complete these steps:
1. Open a browser.
2. Enter the PSII IPP URL as follows:
http://xxx.xxx.xxx.xxx:631/ipp/port1
xxx.xxx.xxx.xxx = the IP address of the PrintServer II
device
:631 = a fixed value
/ipp = a fixed string designating IPP
/port1 = a fixed value
Important • You must have IPP support on your system.
Important • IPP support is not available on all PSII printers. To be certain you are
running the latest version of firmware, visit our web site.
Example • Your address might look like this:
http:198.60.248.120:631/ipp/port1
Note • Since IPP does not have an official standard, usage depends entirely on the
quality of the IPP client and server.