System v queue installation, Configuring system v for zebranet printing, Prerequisites – Zebra Technologies PrintServer User Manual

Page 85: Unix configuration

Advertising
background image

74

PrintServer II User and Reference Guide

Printing Configurations

System V Queue Installation

System V Queue Installation

Configuring System V for ZebraNet Printing

This section describes the configuration of the printing system on the UNIX operating
system. For clarity and brevity, the following specific names are used to represent
general devices or concepts.

lj4

—The local queue name on the UNIX system that

PSII

print jobs are directed to.

ZEBRAPRINTER

—The host name of the remote system that is the

PSII

device. For

example, to Telnet to the

PSII

and invoke the

PSII

configuration utility, you would

enter:

Telnet ZEBRAPRINTER

A host name is not required for the

PSII

– the IP address can be used.

yourqueuename

—This is the name of the queue on the ZebraNet and must end

with 1, 2, 3, or 4, depending on the port selected to service the print jobs. If FF, LF or
NF are the last two letters of the queue name, the job is converted accordingly.

Prerequisites

Before you proceed, the following prerequisites must be met:

• The name ZEBRAPRINTER and the IP address assigned to the

PSII

are in the /etc/

hosts file on the UNIX system.

• The LPD must be running on the UNIX system.

UNIX Configuration

To configure the UNIX machine so users can spool print jobs to
the PCL print queue on the ZebraNet named ZEBRAPRINTER,
complete these steps:

1. Login to the UNIX machine as root.

2. Type lpsystem -t bsd ZEBRAPRINTER.

Advertising