User instructions, Gazco flue sure system, Flame failure device – Yeoman EXE MIDI PR1145 User Manual

Page 8: Running in, Servicing, Ventilation, Installation details, Hot surfaces

Advertising
background image

8

AR0364

11

6.8 Replace the glass frame using the 6 x frame fixing

screws (see Diagram 4) and close door.

7. GAzCO FLUE SURE SYSTEM

The stove is fitted with the Gazco Flue Sure System, which

will act to cut off the gas supply to the burners in the event

of incorrect operation of the flue. If the system acts to cut

off the gas supply, this indicates that there is insufficient flue

pull. If this occurs a minimum of 10 minutes should be

allowed before trying to relight. Continued operation of this

safety device means there may be a serious problem with

the flue system. A qualified gas engineer should inspect this.

Do not use the stove until an engineer says it is safe to

do so.

8. FLAME FAILURE DEVICE

This is a safety feature of all Gazco stoves which

automatically switches off the gas supply should the pilot go

out.

9. RUNNING IN

The surface coating of your Gazco stove burns off during

the first few hours of use, producing a harmless temporary

odour. This disappears after a short period, but if it persists,

ask your retailer for advice.

10. SERVICING

A qualified gas engineer must service the stove every 12

months. In all correspondence, always quote the Model and

Serial Number found on the data badge at the back of the

stove.

11. VENTILATION

Any purpose provided ventilation should be checked

periodically to ensure that it is free from obstruction.

USER INSTRUCTIONS

12. INSTALLATION DETAILS

Make sure your installer completes the Appliance

Commissioning Checklist on page 3. This records essential

details of this stove. In all correspondence, always quote the

Model and Serial Number.

13. HOT SURFACES

This stove becomes hot during normal use. You must use a

suitable fire guard to protect children, the elderly and the

infirm.

Advertising