Zebra Technologies Mobile Printer - Manual (Page 21)

O-21
Cameo 2/3 Series User Guide
Communicating with the Printer
The printer must establish communications with a host ter-
minal which sends the data to be printed. Communications
occur in three basic ways:
• By a cable between the printer and its host terminal
• Infrared (usually by means of the industry standard IrDA
protocol) Units with the IrDA option can be identified by
the “IR” logo on the unit’s keypad.
• Using Bluetooth wireless communications. Cameos with
the Bluetooth option will have a Bluetooth logo on the
lower left corner of the keypad.
• By means of a wireless LAN (Local Area Network)
Cameo printers with the WLAN option are identified by
Cameo 3 Communications Port
Cameo Communications
Serial
Communications
(Cable) Port
(Cameo 2 shown
The IrDA logo or the
Bluetooth logo will appear
here if those options are
installed.
IR
Communications
Window
Serial
Communications
(Cable) Port