Yamaha R-V1103 - Manual (Page 14)

12
Ⅲ
CONNECTING TO DIGITAL (OPTICAL AND COAXIAL) TERMINALS
If your DVD (LD) player, TV/satellite tuner, etc. are equipped
with coaxial or optical digital audio signal output terminals, they
can be connected to this unit’s COAXIAL and/or OPTICAL
digital signal input terminals.
To make a connection between optical digital audio signal
terminals, remove the cover from each terminal, and then
connect them by using a commercially available optical fiber
cable that conforms to EIAJ standards. Other cables might not
function correctly.
Even if you connect an audio/video unit to the OPTICAL (or
COAXIAL) terminal of this unit, you must keep the unit
connected with the same named analog audio signal terminals
of this unit, because digital signal cannot be recorded by a tape
deck or VCR connected to this unit. You can switch the
selection of input signals between “digital” and “analog” easily.
(See page 29 for details.)
Notes
● When connecting an audio/video unit to both of the digital
and analog terminals of this unit, make sure to connect to
both terminals of the same name.
● Be sure to attach the covers when the OPTICAL terminals
are not being used, in order to protect the terminals from
dust.
● All digital audio signal input terminals are applicable to the
sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.
FM
ANT
AM
ANT
GND
75 Ω UNBAL.
GND
MONITOR
OUT
DVD/LD TV/DBS
IN OUT
VCR
VIDEO SIGNAL S VIDEO SIGNAL
MONITOR
OUT IN OUT
VCR
ON SCREEN SELECTOR
S VIDEO VIDEO
REMOTE CONTROL
IN OUT
COAXIAL
DVD/LD
OPTICAL
DVD/LD TV/DBS
PCM/ DIGITAL IN
(AC–3 DIGITAL IN)
PHONO CD TAPE/MD DVD/LD TV/DBS VCR
TAPE PB REC OUT IN OUT
AUDIO SIGNAL
1 3 4
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
ANALOG
OUT
ANALOG
OUT
DVD (LD) player TV/Satellite tuner
(U.S.A. model)