Yamaha R-V1103 - Manual (Page 23)

21
English
DISPLAY PANEL
PRESET
kHz
MHz
MEMORY
AM
FM
SLEEP
TAPE 2 MONITOR
DIGITAL
STEREO
0 20 l00
ROOM 2 CONTROL
NORMAL WIDE PHANTOM AUTO
40 60
SPEAKERS PCM
DSP PRO LOGIC
AUTO TUNING
A
SPEAKERS
B
ROOM 2
70 mm
ENHANCED dB
m S
DIGITAL
DIGITAL
1
3 2 4 5 6 7 8 9
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.
3
AUTO TUNING indicator
Lights up when this unit is in the automatic tuning mode.
4
TAPE MONITOR indicator
Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE/MD MONITOR
button.
5
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
6
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
7
DIGITAL, DSP and PRO LOGIC indicators
“ DIGITAL” lights up when the built-in Dolby Digital (AC-3)
Decoder is on and the signals of selected source encoded with
the Dolby Digital (AC-3) is not in 2-channels. “DSP” lights up
when the built-in digital sound field processor is on, and “
PRO LOGIC” lights up when the built-in Dolby Pro Logic
Surround Decoder is on. Depending on the selected DSP
program, both “
DIGITAL” and “DSP”, or both “DSP” and
“ PRO LOGIC” will light up.
8
Digital audio input signal indicators
When digital audio signals not encoded with the Dolby Digital
(AC-3) are input to this unit, “PCM DIGITAL” lights up.
When digital audio signals encoded with the Dolby Digital
(AC-3) are input to this unit, “
DIGITAL” lights up.
9
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.