Yamaha R-V1103 - Manual (Page 46)

44
1
Tape deck keys
Controls tape deck.
(The A/B/C switch (
F
) should be set to the “A” position.)
* DIR A, B and A/B are applicable only to double
cassette tape deck.
* For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2
CD/LD/DVD player keys
Controls compact disc player, LD player or DVD player.
(To control compact disc player, set the A/B/C switch (
F
) to
the “A” position. To control LD player or DVD player, set the
A/B/C switch (
F
) to the “C” position.)
* DISC is applicable only to compact disc changer.
* STOP is applicable only to LD player or DVD player.
3
Tuner keys
Controls tuner.
(The A/B/C switch (
F
) should be set to the “A” position.)
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
4
DSP program selector keys
Selects a DSP program when the built-in digital sound field
processor (including the Dolby Pro Logic Surround decoder
and the Dolby Digital (AC-3) decoder) is on.
5
TEST key
Used for speaker balance adjustment. (For details, refer to
page 24–25.)
6
TIME/LEVEL·SET MENU switch
Set to the TIME/LEVEL position when you will make an
adjustment on delay time, center speaker output level, rear
speaker output level or subwoofer level. Set to the SET MENU
position when you will make an adjustment or setting change
on a function in the SET MENU mode.
7
SLEEP timer key
This key is used to turn the built-in SLEEP timer on and off,
and to set the SLEEP time. (For details, refer to page 42.)
8
SYSTEM POWER ON and STANDBY keys
Pressing the SYSTEM POWER ON key turns the power to this
unit on and pressing the STANDBY key turns this unit into the
standby mode.
9
RESET button
This button is inside the battery compartment.
Press this button to “reset” the internal microcomputer which
controls remote control operations. Microcomputer “reset” is
necessary when the remote control freezes.
* Pressing the RESET button will not erase learned
functions.
0
MASTER VOLUME (up) and (down) keys
Turns the volume level up and down.
A
MUTE key
When pressed, this key mutes the volume level. To resume the
original volume level, press this key again.
While muting, the indicator on the VOLUME control flashes
continuously.
B
/ and –/+ keys
(up) and (down) keys change items (or functions) in the
mode selected by the TIME/LEVEL·SET MENU switch. – and
+ keys make an adjustment or setting change on the item (or
function) selected by the
or key.
C
EFFECT ON/OFF key
Switches on/off the digital sound field processor (including the
Dolby Pro Logic Surround decoder and the Dolby Digital (AC-
3) decoder).
D
Input selector keys
Selects input source.
E
A/B/C indicators
The position (A, B or C) selected by the A/B/C switch is shown
in red.
F
A/B/C switch
This switch must be used only when the lid of the remote
control transmitter is open. (This switch will not function when
the lid is closed.)
Normally, set this switch to the “A” position. When controlling a
Yamaha LD player or DVD player by using the CD/LD/DVD
player keys (
2
), set this switch to the “C” position.
G
TRANSMIT/LEARN indicator
Lights up when the remote control transmitter is transmitting
infrared signals (when a command key is pressed).
Note
When using the keys to control Yamaha components,
identify them with your component’s keys. If these keys
are identical, their functions will be the same. For each key
function, refer to the corresponding instruction in your
component’s manual.
RESET button