English, Adjusting delay time – Yamaha R-V1103 User Manual

Page 41

Advertising
background image

39

English

Note
The values of the delay time, center level, rear level and
subwoofer output level you set the last time will remain
memorized even when this unit is in the standby mode.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.

Adjusting delay time

You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear or front effect speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.

Notes

Adding too much delay will cause an unnatural effect with
some sources.

When the –/+ button is pressed, sound is momentarily
interrupted.

Program

1. DOLBY PRO LOGIC

DOLBY DIGITAL

2. PRO LOGIC ENHANCED

DOLBY DIGITAL ENHANCED

3. 70 mm MOVIE THEATER

DIGITAL MOVIE THEATER

4. TV SPORTS

5. STADIUM

6. DISCO

7. ROCK CONCERT

8. JAZZ CLUB

9. CHURCH

10. CONCERT HALL

Control range (ms)

15 to 30

0 to 15

15 to 30

0 to 15

15 to 30

1 to 50

1 to 50

1 to 50

1 to 50

1 to 50

1 to 50

1 to 50

1 to 50

Speakers

CENTER

RIGHT SURROUND

LEFT SURROUND

SUBWOOFER

Preset value

0

0

0

0

Control range (dB)

MIN, –20 to +10

MIN, –20 to +10

MIN, –20 to +10

MIN, –20 to 0

If desired, you can adjust the sound output level of the each
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on pages 24 to 25.

Notes

Output level of the center speaker cannot be adjusted when
the program STADIUM, DISCO, ROCK CONCERT, JAZZ
CLUB, CHURCH or CONCERT HALL is selected, and the
input signal is analog, PCM audio or encoded with the
Dolby Digital (AC-3) in 2-channels.

If the function “4. CENTER SPEAKER” in the SET MENU
mode is set in the “PHNTM (phantom)” position, the sound
output level of the center speaker cannot be adjusted. This
is because in this mode, the center sound is automatically
output from the left and right main speakers.

Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.

Adjusting output level of the center, right rear and left rear speakers, and subwoofer

Preset value

20

15

20

15

17

22

20

45

14

22

26

40

30

Advertising