Zoom PS-02 - Manual (Page 31)

Operation
Guide
31
recording.
6.
While playing your guitar, use slider 2 to adjust the
recording level.
The level after effect processing may differ, depending on the selected
patch. You should therefore readjust the recording level if you have
switched patches.
7.
When you are ready to record, press the [ ] key.
After a precount of 4 beats (1 measure), the rhythm track of the song
and audio track 1 are played, and recording on audio track 2 starts.
8.
To stop recording, press the [
■] key.
Also after the rhythm track and audio track 1 playback is completed,
recording on audio track 2 continues, unless the [
■] key is pressed.
9.
To listen to the recorded session, press the [ ] key.
To redo the recording, repeat the process from step 4. For information
on how to delete an audio track, see page 54.
When recording of audio tracks 1 and 2 is completed, record a guitar ad-
lib solo on audio track 3.
1.
Use the cursor [ ]/[ ]keys to cause the EFFECT menu
LED to light up, and select an effect patch.
Select any desired patch here.
2.
Press the [ ] key.
The rhythm track of the song and the recorded audio tracks 1 + 2 are
Recording the lead guitar
PATTERN CHORD RECORD MIXDOWN