Zoom PS-02 - Manual (Page 72)

72
• Backlight operation when running on battery power
(BAKLIT)
When using the PS-02 on batteries, this setting can be used to control
the backlight operation. While the indication "BAKLIT" is displayed,
use the cursor [
]/[ ] keys or slider 1 to select one of the following
settings.
• OF (OFF): Always Off
• At (AUTO): On for 10 seconds when a key or slider is operated (default
setting)
• On (ON): Always On
• Precount operation (PRECNT)
Precount is a series of clicks that are heard before starting playback or
recording. While the indication "PRECNT" is displayed, use the cursor
[ ]/[ ] keys or slider 1 to select one of the following settings.
• OF (OFF): No precount
• rC (REC): Use precount only during recording (default setting)
• rP (REC/PLAY): Use precount during recording and playback
• Select precount number (CNTTYP)
This setting determines the number of clicks that are heard when
precount is enabled. While the indication "CNTTYP" is displayed,
use the cursor [
]/[ ] keys or slider 1 to select one of the following
settings.
• 2 - 8: Sets number of precount clicks (default setting = 4).
• SP (Special): A special pattern is heard, as shown below.
Refer
e
nce
Guide