Zoom PS-02 - Manual (Page 33)

Operation
Guide
33
The previous pages covered recording a guitar signal connected to the
[INPUT] jack. Sometimes you may want to record vocals or an acoustic
guitar via a microphone. You can use either the built-in microphone of
the PS-02 or an external microphone connected to the [INPUT] jack.
Proceed as follows.
◆
Preparations
1.
To use an external microphone, connect the microphone
cable to the [INPUT] jack.
2.
Use the cursor [ ]/[ ] keys to cause the EFFECT menu
LED to light.
3.
Use the EFFECT PATCH [
▲]/[▼] keys to select the patch
where the mic icon ( ) is shown on the display.
This patch is designed specially for microphone recording. When
using the built-in microphone or an external microphone connected to
the [INPUT] jack, this patch must be selected.
• The "MICPRE" effect type in the DRIVE module is the dedicated
microphone input patch.
• If another patch is selected, the built-in microphone cannot be used, and
an external microphone connected to the [INPUT] jack will not be heard
with sufficient gain.
4.
To use the built-in microphone, press the [MIC] key.
The [MIC] key lights up and the signal from the built-in microphone
is used as recording source.
While the [MIC] key is lit, the [INPUT] jack cannot be used. To use an
external microphone, omit step 4 and proceed to the next step.
Mic icon
Recording from a microphone
PATTERN CHORD RECORD MIXDOWN