Zoom PS-02 - Manual (Page 52)

52
2.
Use the cursor [ ]/[ ] keys to select one of the following items,
and then use the cursor [ ]/[ ] keys to make the setting.
• R- Select record track
• CAP Show remaining recording time
• GRADE Select recording quality
• SOURCE Select recording source
• NEW TK Select whether to use a new take (virtual track)
For details, see the sections on the respective items.
3.
When the settings have been made, press the [ ] key to
start recording.
Except for the "NEW TK" option, the settings apply to all songs until
the unit is turned off or the setting is changed. (The "NEW TK"
option returns to the "n" setting with each new recording process.)
◆
Select recording track (R-)
Selects the track on which to record. The indication "R-x" is shown on
the display, where "x" is the track number. Use the cursor [
]/[ ] keys
to select the recording track (1/2/3/23).
If you select "AU" ([AUX IN] jack) or "Ai" ([INPUT] jack + [AUX IN] jack) as
recording source, and select "23" as recording track, recording is carried
out in stereo on tracks 2/3.
During stereo recording, track 1 cannot be monitored.
◆
Remaining time (CAP)
Shows the remaining recording capacity in minutes and seconds. This is
only a display item, it cannot be changed.
Remaining recording time
(minutes/seconds)
Recording track
Recording options
Refer
e
nce
Guide