Zoom PS-02 - Manual (Page 65)

65
8.
To stop editing and return to the Effect menu, press the
[EXIT (CANCEL)] key.
If you switch to another effect patch in this condition, any changes you have
made to the previous patch will be lost. When wanting to keep the results of
your editing session, store the effect patch. For details, see page 66.
◆
Changing the patch name
1.
At the Effect menu, press the [EDIT] key to call up the
Effect Edit menu.
2.
Use the cursor [ ]/[ ] keys until the first character of the
patch name shown on the display flashes.
3.
Use sliders 1 - 3 to select the desired character.
Sliders 1 - 3 have the following function.
• Slider 1: A - Z (capital letters)
• Slider 2: 0 - 9 (numerals)
• Slider 3: <Space> / + / - / @ (symbols)
4.
Use the cursor [ ]/[ ] keys to move the flashing to the
next character you want to edit, and edit the rest of the
name in the same way.
5.
To return to the Effect menu, press the [EXIT (CANCEL)]
key.
If you switch to another effect patch in this condition, any changes you have
made to the previous patch will be lost. When wanting to keep the results of
your editing session, store the effect patch.
Refer
e
nce
Guide