Zoom ST-224 - Manual (Page 33)

• Pad 7 (REVERSE)
Switches between reverse playback (on) and normal playback (oFF). When "on" is selected, playback
proceeds from the end point to the start point. Use the [- ] [+] keys or the [EDIT 1] wheel or the
[LOOP/MARK] pad to make the setting.
Setting values: oFF, on (Default settings: oFF)
• Pad 8 (TRIGGER/GATE)
Selects one of the following three playback modes. Use the [-] [+] keys or the [EDIT 1] wheel or the
[LOOP/MARK] pad to make the setting. This parameter is also valid for the [SOURCE] pad.
• Trigger playback
Sound starts when pad is hit once and stops when pad is hit again.
• Retrigger playback
Same as trigger playback, but hitting the pad during playback restarts from the beginning.
The [SOURCE] pad can not be set with this value.
• Gate playback
Sound is heard only while pad is held down and stops when pad is released (default).
Setting values: trGGEr/rEtrG/GAtE (Default settings: GAtE)
33
Pad
Play
Mode
Operation
[Trigger playback]
Sample plays to the end when pad is hit once
[Gate playback]
[Re-Trigger playback]
Sample plays to the end when pad is hit once
Sample plays only while pad is held down
Sample stops when same pad
is hit again during play Pressing a pad that is playing
stops play and then resumes
from the beginning