Midi implementation – Zoom ST-224 User Manual
Page 73
73
MIDI
Implementation
MIDI Implementation
1. TRANSMITTED DATA
NONE.
2.RECOGNIZED DATA
1) CHANNEL VOICE MESSAGES
STATUS
SECOND
THIRD
DESCRIPTION
1000 nnnn
0kkk kkkk
0vvv vvvv
NOTE OFF
kkk kkkk : Note number ( See NOTE 1 ).
vvv vvvv : Note Off Velocity ( ignored ).
1001 nnnn
0kkk kkkk
0000 0000
NOTE OFF
kkk kkkk : Note number ( See NOTE 1 ).
1001 nnnn
0kkk kkkk
0vvv vvvv
NOTE ON
kkk kkkk : Note number ( See NOTE 1 ).
vvv vvvv : Note On Velocity ( not 0 ).
1010 nnnn
0kkk kkkk
0vvv vvvv
POLYPHONIC KEY PRESSURE
kkk kkkk : Note number ( See NOTE 2 ).
vvv vvvv : Pressure value ( See NOTE 2 ).
1011 nnnn
0ccc cccc
0vvv vvvv
CONTROL CHANGE
ccc cccc : Control number ( See NOTE 3 ).
vvv vvvv : Control value.
1100 nnnn
0ppp pppp
---- ----
PROGRAM CHANGE
ppp pppp : Program cahnge number( See NOTE 4 ).
NOTE : nnnn = MIDI Channel Number ( 0000 - 1111 )
1 :
Recognized Note numbers are 35-59 at Basic channel on normal mode,
or 95-119 at channel 10 at extention mode.
2 :
Note #12(bank1/pad1)-#35(bank3/pad8) control to change "REVERSE of pad_function(PAD)".
Note #36(bank1/pad1)-#59(bank3/pad8) control to change "EFFECT PAD ENABLE(PAD)".
Note #108(source pad) control to change "EFFECT PAD ENABLE(SOURCE)".
Pressure value(0) is turning off,pressure value(not 0) is turning on.
Note
#60(bank1/pad1)-#83(bank3/pad8)
control
to
change
"LEVEL
of
pad_function(PAD)".
Note
#84(bank1-pad1)-#107(bank3/pad8)
control
to
change
"PANNING
of
pad_function(PAD)".
Note #109(source pad) control to change "LEVEL of pad_function(SOURCE)".
Pressure value(0 to 99) is value of the control.
If pressure value is greater than 99, internal pressure value is limited to 99.
Note #110(source pad) control to change "PANNING of pad_function(SOURCE)".
Pressure value(0 to 100) is value of the control.
If pressure value is greater than 100, internal pressure value is limited to 100.
3 :
Control #12 can be used to Effect Parameter 1(control value 0..100).
Control #13 can be used to Effect Parameter 2(control value 0..100).
If control value is greater than 100, internal control value is Limited to 100.
Control #14 can be used to Effect BPM 40bpm(control value 0)..167bpm(control value 127).
Control #15 can be used to Effect BPM 168bpm(control value 0)..250bpm(control valeu 82).
Control #80 can be used to EFFECT OFF(control value 0)/ON(control value 127).
Control #81 can be used to EFFECT SYNC OFF(control value 0) / ON(control value 127).