Smart Technologies 800ix-SMP User Manual

Page 28

Advertising
background image

Setting

Use

Notes

Set to Default?

Resets projector settings to their
default values.

If you select Yes, all projector settings
reset to their defaults, reversing any
menu changes you made. This action
is irreversible.

Don’t adjust this setting unless you
want to reset all of the applied settings,
or unless you’re advised to by a
SMART Support specialist.

USB1 Source

Enables touch for the selected video
source (VGA-1, VGA-2, HDMI or
Disabled) by associating the video
source with the room computer USB
receptacle (USB1) on the ECP.

The default is VGA-1.

When the user switches to the video
source you select in this setting, the
interactive whiteboard recognizes
touch from the device connected to the
room computer USB receptacle on the
ECP.

Selecting Disabled disables the room
computer USB receptacle on the ECP.

This setting was introduced in DDP
firmware version 1.0.0.4.

USB2 Source

Enables touch for the selected video
source (VGA-1, VGA-2, HDMI or
Disabled) by associating the video
source with the laptop USB receptacle
(USB2) on the ECP.

The default is VGA-2.

When the user switches to the video
source you select in this setting, the
interactive whiteboard recognizes
touch from the device connected to the
laptop USB receptacle on the ECP.

Selecting Disabled disables the laptop
USB receptacle on the ECP.

This setting was introduced in DDP
firmware version 1.0.0.4.

Network menu

Network and VGA
Out

Activates the projector’s VGA Out and
RJ45 connector and network features.

Status

Displays the current network status
(Connected, Disconnected or Off).

The default is off.

DHCP

Displays the status of the network’s
Dynamic Host Configuration Protocol
(DHCP) as On or Off.

The default is on.

On enables a DHCP server on the
network to automatically assign an IP
address to the projector.

Off enables an administrator to assign
an IP address manually.

Password
Reminder

E-mails the network password to the
predefined e-mail recipient.

See Web page management on page
59
to set up a destination e-mail
address.

C H A P T E R 3

Using your interactive whiteboard system

18

Advertising