Smart Technologies 800ix-SMP - Manual (Page 35)

The following diagram and table describe the components of the ECP.
Number Function
Left side
1 USB A receptacle (for USB drives)
N
N O T E
USB drives that you connect to this receptacle are only accessible to the room
computer (the computer connected to the USB 1 receptacle).
Front
2 Power button and status indicator light
3 Volume control
4 Input selection
Back
5 Two mini USB B receptacles (connect to room computer and laptop)
6 11-pin connector (connects to ECP cable harness)
7 4-pin connector (for room control)
N
N O T E
Use an SBX8 series control cable (Part No. SB8-CTRL) to convert the 4-pin connector to a DB9
RS-232 connector for use with a third-party room control system. An SBX8 series control cable is
included with SMART Board 800ix-SMP interactive whiteboard systems. Alternatively, you can
purchase an SBX8 series control cable from your local SMART reseller.
C H A P T E R 3
Using your interactive whiteboard system
25