Smart Technologies 800ix-SMP - Manual (Page 76)

N
N O T E S
l
The first time you enable the password settings, the default password value is four numbers,
for example, 1234.
l
If you forget the projector password, refer to Accessing the service menu on page 55 to set
the projector setting to factory defaults.
Simple Network Management Protocol (SNMP)
Your projector support a list of SNMP commands as described in the management information base
(MIB) file. You can download this file by browsing to smarttech.com/software and clicking the MIB
files link in the Hardware section for the SMART UX60 projector.
The SNMP agent in your projector supports SNMP version 1 or 2. Upload the MIB file to your SNMP
management system application, and then use it as described in your application’s user guide.
A P P E N D I X A
Remotely managing your system through a network interface
66