Smart Technologies 800ix-SMP - Manual (Page 33)

No. Connector Connect to:
1 3.5 mm phone jack audio output Speakers (not included)
2 3.5 mm phone jack audio input (×2) Audio sources associated with primary and
secondary computers
3 DB15F RGB video output (VGA Out) Secondary display (not included)
4 DB15F RGB video input (VGA 1) Primary computer (not included)
5 DB15F RGB video input (VGA 2) Secondary computer (not included) through
VGA connection kit
6 DB9 RS-232F ECP cable harness
7 RCA composite video input
(and left and right RCA audio input) Video source (not included)
through RCA connector pod
8 HDMI input High-definition video source (not included)
9 Power Mains power supply
10 USB B Computer (for service access only)
11 RJ45 Network (for web page management and
SNMP access)
12 4-pin mini-DIN S-video input
(and left and right RCA audio input) Video source (not included)
13 7-pin mini-DIN ECP cable harness
14 4-pin power mini-DIN 5V/2A output ECP cable harness
15 3-pin power mini-DIN 5V/1A output [Not used]
N
N O T E S
l
To connect your SMART Board 800 series interactive whiteboard see the SMART Board
885ix interactive whiteboard system installation guide ( smarttech.com/kb/149616 ) or
SMART Board 885ix-SMP interactive whiteboard system installation guide
( smarttech.com/kb/170129 ).
l
To connect accessories to your SMART Board interactive whiteboard, refer to the
documents included with the accessories and consult the SMART Support website
( smarttech.com/support ) for additional information.
C H A P T E R 3
Using your interactive whiteboard system
23