Smart Technologies 800ix-SMP - Manual (Page 36)

T
T I P
If your computer has an HDMI output, you can connect a USB cable from your computer to either of
the USB B receptacles on the ECP and an HDMI cable from your computer to the HDMI connector
on the projector. Associate the HDMI source with the appropriate USB receptacle (see Adjusting
projector settings on page 14). Press the Input button on the ECP to switch to the HDMI input.
Using the RCA connector pod
The RCA connector pod is an optional accessory for the SMART Board 800ix interactive whiteboard
system. Purchase this item from your authorized SMART reseller.
The following diagram and table describe the components of the RCA connector pod.
Number Function
1 RCA composite video input jack (for peripheral devices such as a DVD/Blu-ray
player)
2 RCA audio jack (right input)
3 RCA audio jack (left input)
Using the laptop computer harness
The laptop computer harness enables you to connect a laptop to your interactive whiteboard system
(see Connecting peripheral sources and outputs on page 32).
C H A P T E R 3
Using your interactive whiteboard system
26