3Com Powerware Uninterruptible Power System Prestige Series - Manual (Page 63)

57 Powerware ® Prestige Series Installation and Operator’s Manual for IBM Applications (3000 VA) Uncontrolled Copy
C H A P T E R 5
C
OMMUNICATION
The UPS is equipped with a communications interface port that allows
communication with a wide variety of external devices including:
: Video or dumb terminal
: Serial printer
: Computer with power management or shutdown software
: AS/400 systems
The serial port enables you to monitor and record diagnostic data with
the following communication interfaces:
: Serial Communications Interface
Terminal Mode
Data Dump Mode
Printer Mode, 2400 Baud, with Novell Contacts (default)
Printer Mode, 19200 Baud, with Novell Contacts
: LAN Configuration
Novell-Style Network Interface
3Com-Style Network Interface
AS/400-Style Network Interface
Custom User-Configurable Interface
Initial Communications Settings
The UPS is factory-configured for one of several communication
interfaces (usually determined by the customer). To determine the initial
UPS communications configuration, you can:
: Look at the box label with the serial number (communication mode
is shown in the upper right corner).
: Use the Display Configuration option on the UPS Serial
Communications Menu (see page 60).
: For assistance with IBM 9910 UPSs, see Chapter 8, “AS/400 Service”
on page 75.
If you want to change the UPS configuration settings, use the front panel
or the UPS Serial Communications Menu.
9
9
9