Edimax Technology PT-31W - Manual (Page 22)

21
Here are the descriptions of every setup item:
Item Description
Host Name Input the IP camera’s hostname here, it can be any meaningful
words or characters that will help you to identify this IP camera. You
can use IP camera’s installation location as host name, and this will
help you to identify IP camera when you have many IP cameras
installed.
Indicator LED The LED lights located at the back of IP camera is switched on by
default. But, if you don’t want other people to know the status of
this IP camera (so they will know this IP camera is operating etc.),
you can select ‘Off’ and LED lights will be switched off.
Timezone Select the time zone of residence from dropdown menu to keep
correct date and time.
Daylight Saving If the area you live uses daylight saving, check this box; otherwise do
not check this box to keep time correct.
Keep the current
date and time Select this option and date / time setting will not be changed when
you click ‘Apply’ in the page.
You can check ‘Camera Date and Time’ item in this page to know IP
camera’s current date and time setting.
Synchronize with
computer time Select this item and IP camera will use your computer’s time as its
time.
Synchronize with
NTP Server Select this item and IP camera will keep its date and time setting
synchronized with specified time server (NTP server). Please input
NTP server’s IP address or host name in ‘NTP Server Address’ field,
and select time update interval from ‘Update Interval’ dropdown
menu.