Edimax Technology PT-31W - Manual (Page 46)

45
Item Description
Enable Setting Check this box to enable this event. If you just want to disable this event
temporarily, you can uncheck this box to keep this event and disabling
while not deleting it.
Title Input any description text for this event so you can identify it quickly.
You can use alphabets, numbers, and symbols include: !$-.@^_~ (no
spaces allowed).
Motion
Detection Check this box and this event will be activated when one of motion
detection window detects motion.
Digital Input
1 ~ 2 Check this box and this event will be activated when digital input 1 or 2’s
input signal is high or low (select from dropdown list).
Enable
Schedule Time Check this box and this event will be activated when designated
weekday and time is reached.
You also have to check weekday box, and select time from dropdown
list. If you select ‘Always’ as time, this event will be activated during all
the day.
Enable FTP Check this box and IP camera will save file on FTP server (refer to ‘FTP
Server’ setting in ‘Event Server’ tab) when this event is activated.
Enable EMAIL Check this box and IP camera will send an Email to designated recipient
address (refer to ‘SMTP Server’ setting in ‘Event Server’ tab) when this
event is activated.
Enable Samba
(Net Storage) Check this box and IP camera will save file on samba server (refer to
‘Samba Server’ setting in ‘Event Server’ tab) when this event is activated.
Enable SD
CARD Check this box and IP camera will save file on SD card when this event is
activated. A working SD card must be inserted into IP camera in
advance.
Trigger digital
output for xx
second(s). Check this box and IP camera will trigger digital out to ‘high’ state for xx
seconds when this event is activated, where ‘xx’ seconds must be
defined by the dropdown list.