Edimax Technology PT-31W - Manual (Page 84)

83
same domain name.
Receiver: Input the E-mail receiver’s address
here.
CC: input additional E-mail receiver’s address
here.
Subject: Input the subject of sent E-mail. This
will also help you to identify the E-mail sent by
EdiView .
Number of attachments: Input the number of
snapshot attachments that will sent with E-mail,
so you can see the image of camera by E-mail (1
to 10 attachments only).
Email alerts Interval: Input the time interval
between two E-mails. A new E-mail will not be
sent within the interval you specified here even
a new event is detected.
User: Input the user name for SMTP
authentication. Input only when it’s required by
your SMTP server, you can leave it blank if it’s
not required.
Password: Input the password used by SMTP
authentication.
Camera Scan Interval Input the time interval to wait between camera
scan.
Connection Retry Decides the behavior when EdiView lost
communication with IP camera:
Retry: Retry for the time you specified here.
Always retry: Retry to connect to IP camera
until successfully connected.
When you finishes setting, click ‘OK’ button to save changes you made, or click ‘Cancel’
button to discard all settings you made.