Edimax Technology PT-31W - Manual (Page 34)

33
3-4 IP Filter
When this IP camera is directly connected to Internet and not protected by firewall, this
function acts like a mini built-in firewall to protect the safety of this IP camera and avoid
attacks from hackers.
Here are the descriptions of every setup item:
Item Description
Enable Filter Check this box to enable IP address filter, uncheck this
Box to disable this function.
Accepted IP list Here lists all IP address that can build connections to this IP camera. If
you want to remove a set of IP address from the list, click on the IP
address and click ‘Remove’ button.
IP Address
(Accepted IP list) Input the starting and ending IP address of IP address you wish to
accept connections here. IP camera will only accept connections
established from these IP address.
If you want to specify one IP address only, input the
same IP address in both field.
Click ‘New’ button to add IP address into accepted
IP list.
Deny IP list Here lists all IP address that cannot build connections to this IP