Edimax Technology PT-31W - Manual (Page 88)

87
EdiView can send you an alarm E-Mail message so you can know something happened on
the IP camera (motion detected, video lost, or connection lost). A sound can be played to
notify the operator at the computer where EdiView is installed, too.
To add a new event, click ‘Add’ button, and a new window will appear on the right for you
to setup a new event.
To remove an existing event, select an event in the list and click ‘Remove’ button.
The descriptions of every setup items are listed as follow:
Item Description
Select Camera Select the IP camera to define its event detail.
Alarm Condition Define the type of event which will trigger an
alarm:
Motion detected: Alarm will be triggered when
motion is detected at this IP camera.
Video lost: Alarm will be triggered when video
server’s external camera signal is lost.
Connection Lost: Alarm will be triggered when
network connection to this IP camera is lost.
You can select one alarm condition only here. If