Linksys X-Series - Manual (Page 191)

16
Advanced Configuration Linksys X-Series
WPA2/WPA Mixed Mode
NOTE
If you select WPA2/WPA Mixed Mode as your Security Mode, each
device in your wireless network MUST use WPA2/WPA and the
same passphrase .
Passphrase Enter a passphrase of 8-63 characters . The default is password . If
you used the setup software for installation, then the default is changed to a
unique passphrase .
WPA2 Personal
NOTE
If you select WPA2 Personal as your Security Mode, each device
in your wireless network MUST use WPA2 Personal and the same
passphrase .
Passphrase Enter a passphrase of 8-63 characters . The default is password . If
you used the setup software for installation, then the default is changed to a
unique passphrase .
WPA Personal
NOTE
If you select WPA Personal as your Security Mode, each device
in your wireless network MUST use WPA Personal and the same
passphrase .
Passphrase Enter a passphrase of 8-63 characters . The default is password . If
you used the setup software for installation, then the default is changed to a
unique passphrase .
WPA2/WPA Enterprise Mixed Mode
This option features WPA2/WPA used in coordination with a RADIUS server .
(This should only be used when a RADIUS server is connected to the router .)
NOTE
If you select WPA2/WPA Enterprise Mixed Mode as your Security
Mode, each device in your wireless network MUST use WPA2/WPA
Enterprise and the same shared key .
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS server . The default is 1812 .
Shared Key Enter the key shared between the router and the server .