Linksys X-Series - Manual (Page 197)

21
Troubleshooting Linksys X-Series
The router does not have a coaxial port for the cable connection.
A coaxial cable can connect to only a cable modem . Your modem router works
as a modem with your ADSL Internet, but if you have cable Internet, your
modem router should be connected to a separate cable modem . Insert the
Setup CD into your computer and follow the on-screen instructions to connect
your modem-router to a cable modem .
You want to access the browser-based utility from Cisco Connect.
To enter the browser-based utility from Cisco Connect, follow these steps:
1. Open Cisco Connect .
2. On the main menu, click Router settings .
3. Click Advanced settings .
4. Write down the username and password that are displayed . (To help
protect your password, you can copy it to the Clipboard by clicking Copy
password .)
5. Click OK.
When you try to log into the browser-based utility, your password does not
work.
Your wireless security password also serves as the browser-based utility’s login
password . To see this password:
1. Open Cisco Connect .
2. On the main menu, click Router settings .
3. The Password is displayed on the left side of the screen .
In Windows XP, you do not see the router in the My Network Places screen.
In the Network Tasks section, click Show icons for networked UPnP devices . If
the router does not appear, follow these instructions:
1. Go to Start > Control Panel > Firewall .
2. Click the Exceptions tab .
3. Select UPnP Framework .
4. Click OK .
WEB
If your questions are not addressed here, refer to the website,
linksys.com/support