JVC KW-NSX700 - Manual (Page 59)

59
ENGLISH
Deleting the phone number entries
in the unit
1 Display the preset list/phone book/call
list you want to delete. (☞ page 57)
2
• You cannot delete data when [Phone] is
selected.
3 Select the item you want to delete.
Deletes all the numbers/names in the selected list
A confirmation message appears. Press [Yes].
Settings for using Bluetooth mobile phones
or
• You can also display the setup screen by pressing on the monitor panel.
Menu items Selectable setting/item Initial: Underlined
Auto
Answer ♦ On
♦ Off
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the calls manually.
SMS Notify ♦ On
♦ Off
: The unit informs you of the arrival of a message by ringing and displaying
“Receiving Message.”
: The unit does not inform you of the arrival of a message.
Ring Mode ♦ System
♦ Phone
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not work
depending on the mobile phone.)
Ring Tone
Change When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for received
calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
About mobile phones compatible
with Phone Book Access Profile (PBAP)
If your mobile phone supports PBAP, the phone
book and call lists are automatically copied to the
unit when the mobile phone is connected.
• Phone book: up to 5 000 entries
• Dialed calls, received calls, and missed calls: up to
50 entries each
To display the phone book/call lists of
the mobile phone or the unit
Connected mobile phone
This unit
EN_KW-NSX700/600[E].indb 59 EN_KW-NSX700/600[E].indb 59 12/11/14 13:02 12/11/14 13:02