JVC KW-NSX700 - Manual (Page 75)

75
ENGLISH
Installing/Removing the unit
Installing the unit
Mounting sleeve
Trim plate (2)
Removing the unit
1 Detach the trim plate (2).
Only for KW-NSX700: Open the monitor panel
beforehand. (☞ page 10)
2 Insert the two extraction keys (4), then pull
them as illustrated so that the unit can be
removed.
Mounting bracket removed from the car
Supplied
screws
Select the type of
screws appropriate
for the mounting
bracket.
Screws removed from the car when uninstalling
the car audio originally installed
Supplied
screws
For more stable attachment
Accessory 5
Stay (commercially available)
Screw (commercially available)
KW-NSX700:
Extraction keys 4
KW-NSX600:
Extraction keys 4
When installing the unit using the mounting bracket removed from the car
If necessary, restore the protruding tabs. • When you use screws other than those supplied
(Accessories 6 and 7), use 8 mm-long screws. If
longer screws are used, they could damage the unit.
• Tighten the screws firmly to prevent the unit from
falling off.
EN_KW-NSX700/600[E].indb 75 EN_KW-NSX700/600[E].indb 75 12/11/14 13:02 12/11/14 13:02