Preparation: installing the mounting sleeve, 71 english – JVC KW-NSX700 User Manual
Page 71
Advertising
71
ENGLISH
Preparation: Installing the
mounting sleeve
Step 1 and 2 are only performed for KW-NSX700.
For KW-NSX600, skip to Step 3.
1 Remove the screws.
• Keep the round head screws (M5 x 8 mm) used to
attach the metal protection plates. You may need to
use the screws for installation.
2 Detach the mounting sleeve using the extraction
keys (4) then slide it off.
Extraction keys 4
Mounting sleeve
3 Install the mounting sleeve in the dashboard of
the car.
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
EN_KW-NSX700/600[E].indb 71
EN_KW-NSX700/600[E].indb 71
12/11/14 13:02
12/11/14 13:02
Advertising