JVC KW-NSX700 - Manual (Page 67)

67
ENGLISH
Symptom Remedy/Cause
iP
od/iPhone
No sound comes out of the speakers. • Disconnect the iPod, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does
not work. • Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. (☞ page 28)
• Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the iPod/
iPhone.
A lot of noise is generated. Turn off (uncheck) “VoiceOver” of the iPod. For details, visit
<http://www.apple.com>.
No operations are available when playing
back a track containing Artwork. Operate the unit after the Artwork is loaded.
Sound does not synchronize with the video. Select [iPod] for <AV Input>. (☞ page 47)
• Videos cannot be played.
• No sound of videos come out. • Connect with USB Audio and Video cable JVC KS-U30.
Other cables cannot be used.
• Select [iPod] for <AV Input>. (☞ page 47)
AV
-IN
No picture appears on the screen. • Turn on the video component if it is not on.
• Connect the video component correctly.
EN_KW-NSX700/600[E].indb 67 EN_KW-NSX700/600[E].indb 67 12/11/14 13:02 12/11/14 13:02