JVC KW-NSX700 - Manual (Page 72)

Pin Colour and functions
A4 Yellow Battery
A5 Blue/White Power control
A6 Orange/White Dimmer
A7 Red Ignition (ACC)
A8 Black Ground connection
Pin Colour and functions
B1/B2 Purple
ª / Purple/Black· Right speaker (rear)
B3/B4 Gray
ª / Gray/Black·
Right speaker (front)
B5/B6 White
ª / White/Black·
Left speaker (front)
B7/B8 Green
ª / Green/Black·
Left speaker (rear)
72
ENGLISH
Connection
Aerial cord
Aerial terminal
Rear ground terminal
Wiring harness (1)
10 A fuse
☞ page 73
Connect to vehicle’s reverse lamp harness
when using the optional rear view camera.
Connect to the vehicle’s parking brake detection
switch harness.
Extension wire (3)
For best safety, be sure to connect
the parking sensor.
Light green
If no connections are made, do not let the cable come out from the tab.
Blue with white stripe (Remote output wire)
Brown (Mute control wire)
Blue with yellow stripe
(Steering remote control wire)
Orange with white stripe (Dimmer control wire)
To the remote lead of other equipment (200 mA max.)
Not used
To the OE remote adapter matching your car
To car light control switch
☞ page 73
☞ page 74
☞ page 73
☞ pages 73 – 74
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Vehicle
Red (A7)
Yellow (A4)
Default wiring
Connecting the ISO connectors
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Connector A
Connector B
Yellow (A4)
Red (A7)
Red (Ignition wire)
Yellow (Battery wire)
Purple with white stripe
EN_KW-NSX700/600[E].indb 72 EN_KW-NSX700/600[E].indb 72 12/11/14 13:02 12/11/14 13:02