Einbau im fahrzeug, Installation in the vehicle, Montage dans le véhicule – Britax KIDFIX SICT User Manual

Page 10

Advertising
background image

Fixation avec la ceinture à
3 points du véhicule
(universel)

Pour ce faire, déployez
l'équerre d'écartement

9

sur la face

arrière du dossier

2

.

Inclinez à présent le dossier

2

vers

l'arrière jusqu'à ce que l'équerre
d'écartement

9

repose à plat sur le

dossier du siège du véhicule.
Attention ! Ne pas incliner le
dossier

2

davantage que ne le

permet l'équerre d'écartement

9

.

4.

Montage dans le
véhicule

Le

KIDFIX SICT

peut être monté

dans le véhicule de deux manières
différentes.

Pour protéger tous les
passagers

En cas de freinage d’urgence ou
d’accident, les objets et personnes
non attachés risquent de blesser
d’autres passagers. Veuillez donc
toujours veiller à ce que…

• les dossiers des sièges de voiture

soient verrouillés (enclenchez par
exemple la banquette arrière
rabattable),

• tous les objets lourds ou à bords

tranchants (par exemple sur la
lunette arrière) soient bien fixés,

Fastening with the
vehicle's 3-point seatbelt
(universal)

Fold the out the spacer
bracket

9

on the back of the

backrest

2

.

Then incline the backrest

2

to the

rear until the spacer bracket

9

lies

flat against the backrest of the
vehicle seat.
Caution! Do not incline the
backrest

2

beyond the point

indicated by the spacer bracket

9

.

4.

Installation in the vehicle

The

KIDFIX SICT

can be installed in

the vehicle in two different ways.

For the protection of all
vehicle occupants

In the case of an emergency stop or
an accident unsecured persons or
objects may cause injury to other
vehicle occupants. Please always
check that...

• the backrests of the vehicle seats

are locked (i.e. that a foldable rear
seat bench latch is engaged).

• all heavy or sharp-edged objects in

the vehicle (e.g. on the parcel shelf)
are secured.

Befestigung mit dem
3-Punkt-Gurt des
Fahrzeuges (universal)

Klappen Sie dazu den
Abstandswinkel

9

auf der Rückseite

der Rückenlehne

2

heraus.

Neigen Sie nun die Rückenlehne

2

so weit nach hinten, bis der
Abstandswinkel

9

flächig an der

Fahrzeugsitz-Rückenlehne anliegt.
Vorsicht! Neigen Sie die
Rückenlehne

2

nicht weiter, als der

Abstandswinkel

9

vorgibt.

4.

Einbau im Fahrzeug

Der

KIDFIX SICT

kann auf zwei

verschiedene Arten im Fahrzeug
eingebaut werden.

Zum Schutz aller
Fahrzeuginsassen

Bei einer Notbremsung oder einem
Unfall können ungesicherte
Gegenstände und Personen andere
Mitfahrer verletzen. Bitte achten Sie
deshalb stets darauf, dass...

• die Rückenlehnen der Fahrzeugsitze

festgestellt sind (z.B. umklappbare
Rücksitzbank einrasten).

• im Fahrzeug (z.B. auf der Hutablage)

alle schweren oder scharfkantigen
Gegenstände gesichert sind.

Advertising