Accu-Chek Advantage - Manual (Page 12)

Does the beeper have to
be turned on? No, it is
an optional feature.
Turning the beeper on or
off does not affect the
test results.
The Accu-Chek
Advantage meter is set
to beep when:
• A strip is inserted.
• Blood or control
solution is applied to
strip.
• A result is displayed.
• An error occurs
while testing.
• Buttons are pushed.
1. Turn meter ON.
2. Press ON/OFF and
MEM buttons at the
same time. The
beeper is now on.
3. Press ON/OFF button.
The Beeper is now
off.
4. To turn beeper back
on, simply press
ON/OFF button again.
5. Press ON/OFF and
MEM buttons at the
same time to leave
this function.
Setting the Beeper
20
Code--- or the test strip
symbol flashes.
“ON,” “set” and a bell
appear on the display.
“OFF,” “set” and a bell
appear on the display.
“ON,” “set” and a bell
appear on the display.
Getting Started
21
362-11463 AdvMan Classic-ENGL 7/15/02 12:04 PM Page 20