Pc 5150, Pc 5172 – Acnodes PC 5172 User Manual
Page 28
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
28
PC 5172
17-inch sunlight readable touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218,
3.1 Anti-static Precautions
WARNING!
Failure to take ESD precautions during the installation of the PC 5172 may result in permanent damage to
the PC 5172 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PC 5172 . Dry climates are
especially susceptible to ESD. It is critical that the following anti-static precautions are strictly adhered to whenever handling
the PC 5172 or any other electrical component.
Wear an anti-static wristband - Wearing a simple anti-static wristband can help to prevent ESD from damaging the PC 5172
.
Self-grounding - Touch a grounded conducting material before handling and periodically while handling the PC 5172.
Use an anti-static pad - When configuring the PC 5172 , place it on an antic- static pad to reduce the possibility of ESD
damage.
Only handle the edges of the PC 5172 - When handling the PC 5172 , hold it by its edges.
3.2 Unpacking Precautions
When the PC 5172 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 3.1.
Make sure the packing box is facing upwards so the PC 5152 does not fall out of the box.
Make sure all the components shown in Section 3.3 are present.
3.3 Package Contents
NOTE: If any components listed in the checklist below are missing, do not proceed with the installation. Contact the
ACNODES reseller or vendor the PC 5172 was purchased from or contact an ACNODES sales representa-
tive directly by sending an email to [email protected].
The PC 5172 is shipped with the following components: