Pc 5150, Pc 5172, Inch touch panel pc – Acnodes PC 5172 User Manual
Page 44: Inch sunlight readable touch panel pc
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
44
PC 5172
17-inch sunlight readable touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218,
4.7.2 Panel/ Mounting
To mount the PC 5172 flat panel PC into a panel, please follow the steps below.
NOTE: The maximum panel thickness should be no more than 6 mm.
Step 1: Select the position on the panel to mount the PC 5172 .
Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of the PC 5172 . The recommended
cutout sizes are shown below (Figure 4-18, Figure 4-19 and Figure 4-20).
Figure 4-18: 15" Panel Cutout Dimensions
Figure 4-19: 17" Panel Cutout Dimension