Pc 5150, Pc 5172 – Acnodes PC 5172 User Manual
Page 62
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
62
PC 5172
17-inch sunlight readable touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218,
CPU FAN 1 Mode Setting [Full On Mode]
Use the CPU FAN 1 Mode Setting option to configure the CPU fan.
Full On Mode
DEFAULT
Fan is on all the time
FAN x Mode Setting [Automatic Mode]
Use the FAN x Mode Setting option to configure the second fan.
Full On Mode
Fan is on all the time
Automatic mode
DEFAULT
Fan is off when the temperature is low enough. Parameters must be set by the user.
PWM Manually mode
Pulse width modulation set manually
When the FAN x Mode Setting option is in the Automatic Mode, the following parameters can be set.
Temperature Limit of OFF
Temperature Limit of Start
Temperature Limit of Full
Fan Start PWM
Slope PWM
When the CPU FAN Mode Setting option is in the PWM Manual Mode, the following parameters can be set.
CPU Fan PWM control
Temperature Limit of OFF [025]
WARNING: Setting this value too high may cause the fan to stop when the CPU is at a high temperature and therefore cause
the system to be damaged.
The CPU Temp. Limit of OFF option can only be set if the FAN x Mode Setting option is set to Automatic Mode. Use the
CPU Temp. Limit of OFF option to select the CPU temperature at which the cooling fan should automatically turn off. To
select a value, select the CPU Temp. Limit of OFF option and enter a decimal number between 000 and
127. The temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
Temperature Limit of Start [025]
WARNING: Setting this value too high may cause the fan to start only when the CPU is at a high temperature and therefore
cause the system to be damaged.