Rmc 7152, Pc 5172 – Acnodes PC 5172 User Manual
Page 47
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
47
PC 5172
17-inch sunlight readable touch panel PC
Step 4: Secure the PC 5172 to the interface pad by inserting four retention screws through the mounting arm interface pad and
into the PC 5192 flat panel PC.
4.8 External Peripheral Interface Connectors
4.8.1 LCD Panel Connection
A conventional CRT VGA 15-pin female D-SUB connector is located on the bottom panel to connect the PC 5172 flat panel PC
to a second monitor.
NOTE: To use the dual screen option, please configure this option in the Intel® Extreme Graphics configuration settings. To do
this, open the Control Panel, locate the Intel® Extreme Graphics icon and click on it. Once opened, an option for Multiple
Display is available. Select this option and select notebook as the primary device.
4.8.2 Ethernet Connection
The two external peripheral interface RJ-45 connectors can be connected to an external LAN to provide Internet connectivity to
the flat panel PC.
.The "BIOS FEATURES SETUP" allow you to configure your system for basic operation. The user can select the system's
default speed, boot-up sequence, keyboard operation, shadowing and security.
A brief introduction of each setting in the BIOS FEATURES SETUP program is given on the next few pages.
4.8.3 USB Connection
The external peripheral interface USB connectors provide easy and quick access to external USB devices. The external
peripheral interface USB connectors are a standard connector and can easily be connected to other USB devices.
4.8.4 Keyboard and Mouse Connection
Two PS/2 connectors on the external peripheral interface panel facilitate the connection of a mouse and a keyboard. To connect
either device, plug the PS/2 connector at the end of the keyboard or mouse cable into the corresponding PS/2 connector on the
external peripheral interface panel.
4.8.5 Parallel Port Connection
The parallel port is typically connected to a printer, but can also be connected to other parallel devices.
4.8.6 Serial Port Connection
The external peripheral interface panel serial connectors provide easy and quick access to external serial devices.
4.8.7 Audio Port Connection
The external peripheral interface panel audio ports provide line in, line out and speaker connectivity.