Introduction, Manual usage, A. general – ACR&Artex ME406 Portable ELT User Manual
Page 12: B. application
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ME406P (453-6611)
25-62-31
Page 12 of 85
JUN 25/13
INTRODUCTION
TASK 25-62-31-990-801
1. Manual Usage
SUBTASK 25-62-31-990-001
A. General
(1)
www.acrartex.com
for the
latest information and any updates to this manual.
(2)
Information on COSPAS-SARSAT emergency locator beacon registration requirements and
procedures is provided in Appendix A – ELT Registration on page 76.
(3)
Web links provided in this manual were accurate at time of printing, but may be subject to
change.
(4)
ACR Electronics reserves the right to add approved components to the ELT system; including,
but not limited to antennas, remote switches, and coaxial cables.
(5)
Regulatory references contained herein are generally confined to United States and Canadian
requirements and, in any case, should not be considered all encompassing. Consult your
national aviation authority for applicable requirements.
SUBTASK 25-62-31-990-002
B. Application
(1)
This manual constitutes supporting data/documentation for the ME406P ELT, including:
(a)
Description and Operation
(b)
Test and Fault Isolation (includes inspection criteria)
(c)
Removal
(d)
Installation
(e)
Registration
(f)
Illustrated Parts List
(2)
In the United States, the ME406P ELT must be installed and maintained in accordance with
the requirements herein and 14 CFR, FAR Parts 43, and 91; and other airworthiness
requirements, as applicable.
(3)
In Canada, the ME406P ELT must be installed and maintained in accordance with the
requirements herein and Canadian Aviation Regulations (CAR), Part V, Paragraph 551.104 and
other CAR airworthiness requirements, as applicable.