Figure 3. remote switch front view, Figure 4. buzzer, Figure 5. battery pack assembly – ACR&Artex ME406 Portable ELT User Manual
Page 24: Figure 3, Remote switch front view, Figure 4, Buzzer
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ME406P (453-6611)
25-62-31
Page 24 of 85
JUN 25/13
(i.e., deactivate) the ELT. See Figure 3. Remote Switch Front View.
NOTE: The ELT CANNOT be disarmed or disabled from the cockpit. Cockpit operation is
limited to deactivating or manually activating the ELT.
Figure 3. Remote Switch Front View
(3)
The buzzer (i.e., horn) provides an audible alert when the ELT is active. See Figure 4. Buzzer.
Figure 4. Buzzer
(4)
The battery pack for the ME406P ELT consists of two “D” size lithium manganese dioxide cells
connected in series. To prevent the cells from being charged, diodes are connected across
each cell and fuses are connected to the output. See Figure 5. Battery Pack Assembly.
Figure 5. Battery Pack Assembly
ARTEX
ON
ARM
Press ON
Wait 1 Second
Press ARM
EMERGENCY USE ONL
Y
Test/Reset
ELT
LED
SWITCH