Model description, A. me406p, Figure 1. elt orthogonal axes – ACR&Artex ME406 Portable ELT User Manual

Page 13

Advertising
background image

25-62-31

Page 13 of 85

JUN 25/13

ARTEX PRODUCTS / ACR ELECTRONICS, INC

DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL

ME406P (453-6611)

(4)

ME406P ELT installation and maintenance in all other countries must comply with the

requirements herein and applicable national airworthiness requirements.

(5)

The accessories (i.e., remote switch and antennas) addressed in this manual are the

accessories most commonly associated with the ME406P ELT. Other options, such as a

different remote switch configuration or a navigation interface device, should be installed and

maintained in accordance with the written instructions specific to the accessory.

NOTE: Contact ACR Electronics, Inc., for optional accessories approved for use with a

ME406P ELT.

(6)

To ensure proper operation, only parts listed in the Illustrated Parts List of this manual or

those recommended by ACR Electronics, Inc., may be used as replacement parts for the

ME406P ELT.

TASK 25-62-31-990-802

2. Model Description

SUBTASK 25-62-31-990-001

A. ME406P

(1)

The ME406P is a type AF (Automatic Fixed) and type AP (Automatic Portable) beacon, which

transmits on 121.5 and 406 MHz.

(a)

When functioning as a type AF ELT, the ME406P is connected to a cockpit remote switch

and a fixed antenna mounted on the exterior of the aircraft.

(b)

When functioning as a type AP ELT, the ME406P is intended only for operation outside of

the aircraft. In this mode of operation, the ELT is configured with an auxiliary antenna,

which is stowed during flight and deployed for portable use.

(2)

The ME406P ELT is designed for helicopter installations and features a 5-axis G-Switch module

in addition to the primary G-switch, which is oriented to line-of-flight. This design allows the

ELT to be activated in all six axes. See Figure 1. ELT Orthogonal Axes.

Figure 1. ELT Orthogonal Axes

(3)

The ME406P ELT is enclosed in an impact resistant plastic casing and mounts on a tray made

of similar material.

(4)

When ordered as a system, an installation kit, cockpit remote switch, coax cable, audible

buzzer, fixed antenna, and portable antenna are provided.

+Z

-Z

+X

-X

-Y

+Y

Advertising