Section 1— general guidelines, Contraindications, Installation – Activeforever Invacare microAIR Lateral Alternating Pressure Mattress & Compressor (microAIR Mattress with Compressor 36 x 80 x 15) User Manual

Page 8: Entrapment may occur, Section 1—general guidelines

Advertising
background image

SECTION 1—GENERAL GUIDELINES

MA90 and MA95 Series Mattresses

8

Part No 1148139

SECTION 1—GENERAL GUIDELINES

ƽ WARNING

SECTION 1 - GENERAL GUIDELINES contains important information for the safe

operation and use of this product.

Contraindications

ALWAYS consult the patient’s physician before using the MA90Z and MA95Z systems.

Installation

The MA90Z and MA95Z (including bariatric) systems MUST be installed on medical bed 
frames with bed side rails. The side rails MUST be in the raised position whenever a 
patient is on the bed.
Controls on the footboard may be obstructed by the power unit on a few bed frames. It 
may be necessary to relocate the power unit. Refer to Installing the Power Unit on page 11.

Check that air hoses and power cord are clear of moving bed components before placing 
a patient on the bed. Operate all bed frame motorized functions through their full range 
of motion to be certain that there is no pulling, interference or pinching.
DO NOT strap the mattress to the bed frame at the head and foot ends. Secure ALL 
mattress straps. Secure the straps to the bed deck at the head and foot ends and to the 
frame at the center of the bed. Otherwise damage to the mattress will occur when the head 
and foot ends are raised. Refer to Installing the Mattress Replacement System on page 10.

Entrapment May Occur

ƽ WARNING

Patient entrapment with bed side rails may cause injury or death. Mattress MUST

fit bed frame and side rails snugly to prevent patient entrapment. Follow the

manufacturer’s instructions. Monitor patient frequently. Read and understand the

Owner’s/Operator’s Manual prior to using this equipment. Invacare product

manuals are available at www.invacare.com or your dealer.
Proper patient assessment and monitoring, and proper maintenance and use of

equipment is required to reduce the risk of entrapment. Variations in bed rail

dimensions, and mattress thickness, size or density could increase the risk of

entrapment. Visit the FDA website at http://www.fda.gov to learn about the risks of

entrapment. Review “A Guide to Bed Safety”, published by the Hospital Bed Safety

Workgroup, located at www.invacare.com. Use the link located under each bed rail

product entry to access this bed safety guide.
Refer to the owner’s manuals for beds and rails for additional product and safety

information.
After any adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely. Assist rails with dimensions different from the

original equipment supplied or specified by the bed manufacturer may not be

interchangeable and may result in entrapment or other injury.

Advertising