Acumen AiP-Y14D - Manual (Page 14)

13
For Internet access configuration, please contact your local ISP for global IP address. Once the
physical Internet connection gets installed, enter IP address (global), Subnet Mask, and Gateway IP
from the ISP.

Default DNS IP Address —Primary Domain Name Server, the IP address of the domain name
server

Second DNS IP Address —Secondary Domain Name Server, the IP address of the domain
name server, a backup DNS server for default DNS

PPPoE Account —Account name of PPPoE service

PPPoE Password
—Password of PPPoE service
Chapter 3-4-2 DHCP Setting
Router, gateway, or other software DHCP servers can dynamically assign an IP address to the H.264
HD video server or IP PTZ camera. There is no need to configure IP address, subnet mask, and
gateway. Since the DHCP may assign a different IP address to the H.264 HD video server or IP
PTZ camera after power off, a user can use IPScan utility to launch Web Browser for searching H.264
HD video server or IP PTZ camera. To enable DHCP, click on DHCP option and click on Submit
button.
Chapter 3-4-3 HTTP & RTSP Service
HTTP protocol is a reliable protocol for sending video streaming. Port forwarding technology can be
used for sending video over Internet. The detail is described in the appendix. For changing HTTP
service
’s port number, please consult available port number from your network administrator.
Change the port number at the port field and click on “Submit” button.
Note: Once the DHCP option gets enabled, IP camera of the IP address assigned by DHCP server. This
feature allows only in LAN environment.
Note: For low latency application, please select RTSP/UDP streaming option.