Acumen AiP-Y14D - Manual (Page 20)

19
AWC Mode
Auto White Balance Control（One-Push White Balance).
Manual Mode
In this mode, users can change the White Balance value manually via specifying R gain and B gain; the
range of R/B gain is from 0 to 127.
Indoor Mode
The indoor mode setting.
Outdoor Mode
The outdoor mode setting.
■ Sharpness
Increasing the sharpness level can make the image looked sharper; especially enhancing the object’s
edge. The Sharpness value is adjustable from 0 to 14.
■ BLC
BLC Mode
Users can choose to activate or disable the BLC function or HLC function.
BLC Level
Select BLC function level (Operational when BLC Mode is ON).
-1：(Weak) ～ 0：(Default) ～ +2：(Strong)
HLC Level
Select HLC function level (Operational when BLC Mode is HLC). The Level range is adjustable from -32 ~
+32
HLC Description:
Possible to see car number plate and other more visible by level control of halation part such as headlight,
and so on.
Chapter 3-6 PTZ Settings
Under the tab <PTZ>, there are categories including: <General>, <PTZ Advance> and <PTZ
Schedule>.
Chapter 3-6-1 General Settings
Preset
The Preset Programming can be found under this path: PTZ> General.
Totally 128 Preset Points can be programmed for the IP Camera. Please refer to the instructions below to set a
Preset Point.
Preset Setting
To setup a Preset Point, please first move the cursor to the PTZ control panel. Then move camera to desired
position by using pan, tilt, and zoom buttons. Adjust the lens ’ iris and focus by using iris and focus buttons.
Subsequently, assign a number for the current position from the drop-down Preset Point List. Then assign a Dwell
Time and Active Speed for the current position from the drop-down Dwell List and Speed List. Click on the button
<Save> to save the settings mentioned above.