Acumen AiP-Y14D - Manual (Page 17)

16
Chapter 3-5 Video Settings
This section describes the details in setting the H.264 video
’s attributes. The settings of bit rate
control, video input, and video resolution can be configured.
Chapter 3-5-1 Video General
For transmitting H.264 video over low bandwidth network such as Internet, please set the bit rate
close to network upload bandwidth. H.264 IP camera can encode video frames based on the bit
rate setting.
Chapter 3-5-2 Weighted Streaming Mode
Weighted streaming mode is activated when an alarm went off. The streaming goes to the
maximum speed, for example 30 FPS. If there is no alarm activity, the streaming stays one frame
per second for saving bandwidth and storage.
Alarm Interval
 Profiles: Selections of streaming
combination
 Profile Name: Description of the
streaming profile
 Compression: compression type of the
streaming profile
 Resolution: the resolution of the
compression
 VBR/CBR: VBR: Video quality
encoding mode/constant bit rate
encoding mode.
 Bit Rate: Maximum bit rate available
for a network connection
 Output Frame Rate: the frame rate of
the profile
 GOP: I frame period per second
 Video Input: sensor input device
 TV System Output: NTSC/PAL video
system