Acumen AiP-Q4U - Manual (Page 35)

AiP-N series 16CH/9CH/4CH Manual
34
Chapter 2: Hard Drive(s)
2.1 Adding hard drive(s)
Please ensure unit is switched off
Open unit by removing side and rear screws
Add hard drive(s) using the supplied mounting screws and sata/power cables
Power Unit
Power up unit by turning the switch on the rear to on
2.2 Formatting Hard Drive(s)
Enter the setup menu
Select system from the left hand options
Select HDD info
Installed drives will be listed
Select drive(s) to format
Select enter
Select OK to complete
Note: If you have purchase a unit with a hard drive installed, please ignore sections 2 and 3.
Note: See user guide for how to navigate the system, i.e. menu’s, camera selection etc.